ATF Box N9 Flashing v8.00 Update!!

Advance Turbo Flasher v8.00

Release Date: November 25, 2011


HARMATTAN (MEEGO) Flashing Engine Fully Supported
--> FULL Flash N9-00, N950 and other upcoming MEEGO Devices
--> Flash EMMC (Mass Memory)
--> Secure User Data Erase (Removes Phone User Lock and Security Settings)
--> Supports Cold Flashing via "Skip ADL Chk" (Use only for non-booting Devices)

Known Limitations about MEEGO HARMATTAN Phones (N9-00 and N950)
--> Entire PM area is Write Protected... You can Read, but you cannot Write back anything
--> Security Code which is Read by ATF Software (PM 308,5) is NOT the same as the PHONE LOCK Code
--> When Phone goes to TEST MODE after flashing, it is Normal for ATF to get an ERROR while
reading IMEI and Simlocks on the First Read Attempt.
--> It is not Possible to Downgrade the Firmwares on these phones. So make sure that
your required Language Pack Exist on the Highest Firmware Version before
attempting to Upgrage your phone.

 

Bug Fixes:

1. FORCE Broadcom into TEST MODE is NO LONGER NEEDED!
--> NORMAL MODE Decrypt PM 120 NOW FIXED
--> NORMAL MODE Scan Phone Hang NOW FIXED
2. Automatically Selects "Backup RPL" before Phone is Authorized via USB Connection
3. Time and Date Format for saving PM and RPL files FIXED
4. ATF Support Site Login and ATF Network Login Delays FIXED
5. Improved BB5 ENO Flashing for USB ADL (Rapido Phones)
6. Re-Enabled SL3 to SL2 Downgrade Unlock for OLD HASH RAPIDO Phones

Please Read Carefully the Release.txt so you will have some Basic Idea on how
to deal with MEEGO HARMATTAN Phones (N9-00, N950)...

DO NOT FLASH PHONES Marked with "PROTOYPE"... You will kill it!



================================================== ====
================================================== ====
BB5 MEEGO / HARMATTAN FLASHER
================================================== ====
================================================== ====

1. Turn OFF Phone and wait 10 Seconds...
2. Connect the USB Cable to the PHONE Micro USB Port
3. Connect the USB Cable to the PC USB Port

TIPS & INFORMATION:
1. To Turn OFF the Phone, PRESS and HOLD the POWER
button for at least 10 Seconds...
2. Battery Charging will still work on "DEAD" Phones.
3. Factory Reset will make Flashing 15 minutes longer
and it will Totally Erase the User Data and Remove
the Phone Lock + Security Code as well...
4. Skip ADL Chk will Cold Flash the Device.
================================================== ====
================================================== ====