Saturday, August 18, 2012

Nokia C1-01 CHARGER NOT SUPPORTED

Posted by at 0 comments

Nokia C1-01 Charging Solution/Charging ways

Posted by at 0 comments

Nokia C1-01 Light Solution 100% Working

https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgfCrxdcHsVxw40IV7hbX_UERChGKmPw6K7WAVIQoOgQiGmvmngUGS_2dU7g3CFSTyIM_VFh8Z4AA4_hLjrvqi40lgXt9STK09bCnpAAbvzgAO3Tm4jG2T0JSNgtnjyVGSH0MAFJeQFYn0/s1600/light11.jpg
Posted by at 0 comments

Nokia C1-01 Local mode/Test Mode Solution

Posted by at 0 comments

Nokia C1-01 "Insert Sim" Problem Solution

Posted by at 0 comments

Wednesday, August 15, 2012


Posted by at 0 comments

Nokia 2690 Display Light Solution

Posted by at 0 comments
Posted by at 0 comments

Nokia 1202/1280/1616 Dead Solution


The mechanism of the latest nokia phones like nokia 1280,nokia 1616 and  nokia 1680 etc. is very poor. They are not very good phones in all senses. Also the repairing work of these phones is very hard. Sometimes these phones get Dead automatically, and we are unable to find the exact reason. We try to repair them in many ways.
To find the exact reason of “No Power On”, please follow the below steps:
  1. First of all check the phone for liquid damage, and so, then clean the whole PCB and charging connector. Then Check.
  2. If problem not solved in first step, try to connect the phone with any Flashing Box like uFs, ATF etc. If  TX,RX ok and phone giving info, then just change the LCD. Phone will be Power On 100%.
  3. If phone not connecting on any BOX, then just Rehot the CPU and Power IC.
In almost 99% of these phones, the problem is solved by changing the LCD. We think that if LCD is dead, then either the Backlight should be on or at least Incoming-Outgoing or Key Tone should come. But there is no such syndications in these phones if the LCD gets Shot. So try to change the LCD only.
Posted by at 0 comments

Nokia 1202 Display Problem/Display Ways

Here is the final solution for Nokia 1202 Display solution. After getting into water or something else, the supplies are lost. To repair them, we have to makejumpers. So here are the complete solution for display. If all supplies are ok and there is no display on the set, then just slidely rehot the black Display IC.

Posted by at 0 comments

Nokia 1202 Light Problem

This is the solution for nokia 1202 Light problem. Please follow the below steps to resolve the light problem in nokia 1202.
  1. First Check for the light supplies on LCD connector, if OK then change the LCD.
  2. If not succeed in first step, then change the 2 leg black DIODE (Shown in the picture). In 99% case, the problem is solved by changing the DIODE.
  3. If step to doesn’t work, then change the 3 leg component.
  4. Not succeed in step 3?? Don’t worry, now change the COIL (Shown in the picture). Now it will be success.
You can find these components in Nokia 1202,1280,1616, C1-01, C1-02,C2 etc similar handsets.

Posted by at 0 comments

Nokia 1202/1280/1616 Dead Solution


The mechanism of the latest nokia phones like nokia 1280,nokia 1616 and  nokia 1680 etc. is very poor. They are not very good phones in all senses. Also the repairing work of these phones is very hard. Sometimes these phones get Dead automatically, and we are unable to find the exact reason. We try to repair them in many ways.
To find the exact reason of “No Power On”, please follow the below steps:
  1. First of all check the phone for liquid damage, and so, then clean the whole PCB and charging connector. Then Check.
  2. If problem not solved in first step, try to connect the phone with any Flashing Box like uFs, ATF etc. If  TX,RX ok and phone giving info, then just change the LCD. Phone will be Power On 100%.
  3. If phone not connecting on any BOX, then just Rehot the CPU and Power IC.
In almost 99% of these phones, the problem is solved by changing the LCD. We think that if LCD is dead, then either the Backlight should be on or at least Incoming-Outgoing or Key Tone should come. But there is no such syndications in these phones if the LCD gets Shot. So try to change the LCD only.
Posted by at 0 comments

Nokia 1110/1112/1600/2310 Light Solution without IC working

Posted by at 0 comments

Change windows 7 Log on Screen without any software

Here is a simple and easy trick to change the logon screen of  windows 7
  • Download the registry file from here. Extract the file and double-click the registry entry to add into system.
  • Now go to the following folder C:\Windows\System32\oobe.
  • Here create a new folder Info in the oobe folder.
  • Again create a new folder named backgrounds inside the Info folder.
  • Copy your favorite image file into this folder (backgrounds) and rename this as backgroundDefault.
  • The image must be JPG format and size must be less than 256 KB.
  • Now Reboot your PC and see the change.
Posted by at 0 comments

Tuesday, August 14, 2012

Beyond B 68 flesh file


Posted by at 0 comments

Monday, August 13, 2012

Unlock Your Idea Huawei E-1550 3g Net setter With This Step By Step Tutorial (Screen Shots Included)

howtounlockideanetsetter Unlock Your Idea Huawei E 1550 3g Net setter With This Step By Step Tutorial (Screen Shots Included) we have already written unlocking tutorial for idea 3g huawei E-1550 net setter and got huge support from our readers so heartily thanks to all our readers for supporting us and please give this type of support so we can do more.we  have also written tutorial for unlocking airtel Micromax Net setter. Lets come on point our previous tutorial is still working  but i have seen that many readers are facing problem in short tutorial so i have decided to write step by step tutorial with screen shots so enjoy the tutorial.

#. Requirements

#. Needed Software

  1. Huawei Firmware  For Idea Netsetter E-1550  (E155XUpdate_11.608.14.15.311.B418)  Get Huawei Firmware From Here
  2. Huawei Video MMS Dashboard   (HUAWEI UTPS11.302.09.06.209)Get Huawei Video MMS Dashboard From Here
  3. Huawei Code UnlockerGet Huawei Code UnlockerFrom Here

#. Needed Hardware

  1. Idea Net setter With Default Idea Sim (Default Sim Mean Sim That You Got With Netsetter)
  2. Computer Having At least 256Mb Ram

#. Step By Step Tutorial

  • First Of All Collect All Software And Hardware
  • Then Note Down Your IMEI number in One Page
  • Open Huawei Code Calculator And Calculate Your Unlock Code By Putting Your IMEI number in Blank IMEI number And Note Down Flash Code In Page (Flash Code Is Unlock Code) See Below Screen Shot For Helpideanetsetterunlcock Unlock Your Idea Huawei E 1550 3g Net setter With This Step By Step Tutorial (Screen Shots Included)
  • Then insert your Data Card With Default Sim
  • Now Go-to Huawei Firmware And Install It With The Help Of Following Screen ShotsFirst of all click on accept terms and then click on next ideanetsetterunlcock1 thumb Unlock Your Idea Huawei E 1550 3g Net setter With This Step By Step Tutorial (Screen Shots Included) Then It Will Search For device Have A Look ideanetsetterunlcock2 thumb Unlock Your Idea Huawei E 1550 3g Net setter With This Step By Step Tutorial (Screen Shots Included) After Searching the netsetter it will ask to update Have A Look At Following Screens ideanetsetterunlcock3 thumb Unlock Your Idea Huawei E 1550 3g Net setter With This Step By Step Tutorial (Screen Shots Included) ideanetsetterunlcock4 thumb Unlock Your Idea Huawei E 1550 3g Net setter With This Step By Step Tutorial (Screen Shots Included)
  • Now Go-To Video MMS Dashboard and install it with the help of this screen shots Given In Below Step
  • You Are Done Enjoy The Trick

For Any Other Help Please Contact Me Via Comments

Posted by at 1 comments

huawei EG162G firmware download

Huawei EG162G  modem is a new data card launched by huawei recently and here is a list of features you would love to know about EG162G and right after that you will get huawei EG162G firmware download link for free.
Style: Internal
Type: Wireless
Interface Type: USB
Brand Name: Huawei
Model Number: Huawei EG162G
EG162G thumb Huawei EG162G Firmware Download : Modem(Netsetter) Dashboard
Huawei EC162G Features

  • Quadband: GSM 850/900/1800/1900MHz
  • Support network :EDGE,backward compatible with GPRS/GSM
  • Zero CD support
  • Series: EDGE: 10-level GPRS: 10-level
  • Speed Maximum 230.4 Kbps
  • Compatible systems: Windows 2000/XP/Vista/MAC
  • Function:SMS,Internet connecting Funtion
  • Support for Multiple APNs ,SMS (send and receive) ,
  • Dial-up networking
  • Size : 81×24×11mm
Download Huawei EG162G Firmware Upgrade from below link.
Download Huawei EG162G  Firmware
Posted by at 0 comments
Posted by at 0 comments

Huawei Modem Unlocker v.5.8.1

Huawei Modem Unlocker v.5.8.1

-----------------------------------------------

Screenshot













-----------------------------------------------


Huawei Modem Unlocker 5.8.1 by Bojs.

Features:

1. Smart Unlocking of Huawei Modems (OLD firmwares)
2. Smart Temporary Unlocking of Huawei Modems (NEW firmwares)
3. Upgrade Download/Upload speed of SOME Huawei modems.
4. Enable/disable Voice feature.
5. And more.....



Creditz to Bojs and Others....



br,
nirav496086.

-----------------------------------------------

Rate this thread if you like

Password : bojs

-----------------------------------------------
Attached Files
File Type: zip HuaweiUnlockerJuly2011.zip (24.3 KB, 324 views)
File Type: rar HMU.082011.rar (24.5 KB, 142 views)
File Type: zip HMU.5.8.1.zip (27.9 KB, 44 views)
Posted by at 1 comments

Zte Modem Unlocker Free

Download zte driver 

http://filehook.com/a0vn260imy54/ZTE_K3765-Z_WinXP_Vista.zip.html


Zte K3565-Z unlocker

http://depositfiles.com/en/files/f1brubyuy


All zte unlocker

http://www.4shared.com/file/Ptm17ItK/all_zte_gsm_unlocker.html
Posted by at 0 comments
Posted by at 0 comments

Idea E1732 Unlock without jtag and any paid software

Idea E1732 Unlock without jtag and any paid software

 Use CDMA WORKS Shope ( Crack working )

Connect Modem Port

Send SPC 000000

Backup NV 0 TO 9999 ( Dec )

Save file IMEI.

Download this

it will give error in last

Ignore it

Reconnect modem 


Idea e1732 unlock video
If Any Problem In Unlocking....................


............Watch Here..............
Posted by at 0 comments

AIRCEL MODEM MMX 352g Free Unlocker

Free Unlocker MMX 352g AIRCEL MODEM



DOWNLOAD LINK
Posted by at 0 comments

Huwei E155XUPDATE_11.609.20.00.00. Unlocking


http://hotfile.com/dl/125611176/f656d4f/E155XUPDATE_11.609.20.00.00.zip.html
http://www.multiupload.com/4I5GTPWMJM
Posted by at 0 comments

Huwei EG162G Updat

Model : EG162G
Operator : NORMAL
Version : 11.001.09.00.000

Download Link : EG162GUpdate_11.001.09.00.000.​zip

http://www.multiupload.com/Q5T​9FK8ZD6
Posted by at 0 comments

Huwei E367 Update

Model : E367u-2
Operator : Idea
Version : 11.810.09.21.356

Download Link : E367Update_11.810.09.21.356.B7​26.zip
Posted by at 0 comments

Huwei Model : E153 update

Model : E153
Operator : Normal
Version : 11.609.18.00.00

Download Link : E153Update_11.609.18.00.00.B427.zip
Posted by at 0 comments

Huawei E1732Update.11.126.16.00.356.B427

Model : E1732
Operator : IDEA ( Locked )

Version : 11.126.16.00.356

Download Link : E1732Update.11.126.16.00.356.B427.zip
Posted by at 0 comments

Huwei E155XUPDATE

Model : E155X
Operator : Normal
Version : 11.609.20.00.000

Download Link : E155XUPDATE_11.609.20.00.00.zip
Posted by at 0 comments

DC- UNLOCKER - NEW VERSION 1.00.0764


Added new Phones in new dc-unlocker  VERSION 1.00.0764

Huawei U8107
Huawei U5110
Huawei U5900
SFR STARSHINE
ZTE C100
ZTE Jack 3G
ZTE T50


CLICK TO DOWNLOAD
Posted by at 1 comments

VODAFONE / HUAWEI LATEST , - UNLOCKER



Well , here is the ultimate unlocker software which can unlock your latest vodafone, Zte, huawei and Amoi handsets just put your imei number and get unlocked...

here is the file link attached

http://www.4shared.com/get/Qeg2v1ki/VODA_HUWAEI_UNLCKER_BY_KHALID_.html
Posted by at 0 comments

Micromax x352g modem unlocking tested solution - AIRCEL


DEAR, IF YOU WANT TO UNLOCK THIS MODEM MICROMAX X352G (AIRCEL), SO NOTHING TO WORRY, NOW, SOLUTION IS HERE, IF WANT IT CONTACT ME ON YAHOO ID.  pawanlovesu2004@yahoo.com


just plug and install the modem first, and then after use this software and it will automatically detect the modem and do not plug it while upgrading the software and after 10 minutes flashing, 100% complete, your modem will be unlocked to use any GSM sim in it. tested 100%. thanks and enjoy




FEATURES GIVEN BELOW:-
Network frequency bands this modem supports 850/900/1800/1900 MHz /2100 MHz

HSDPA- Downloading speed is upto 7.2 Mbps



HSUPA- Uploading speed up to 5.76 Mbps

UMTS- Download as well as uploading speed up to 384 Kbps

Operating System-
Windows 2000  XP SP2/ VISTA, Windows 7 Mac OS X 10.4.9 or higher (only support INTEL platform), up to 10.6.0 version

Plug and Play- Yes,
Not any CD required for it

Color- White, aircel and micromax logo printed on it with its cap
Posted by at 0 comments

SXC TATA 1080 (DEAD) MODEM SOLUTION

 

 
DEAR HERE IS NOW THE EMERGENCY SOLUTION COMES FOR THE TATA MODEM DEVICE SXC-1080 FOR DEAD MODEM, SO JUST DOWNLOAD THIS EMERGENCY FLASH TOOL WITH OLD MODEM EMERGENY FLASH FILE AND NEW MODEM EMERGENCY FLASH FILE AND ENJOY.

http://www.ziddu.com/download/12155093/1080XMODEMEMERGENCYMODE.rar.html

AND PLEASE SEND THIS WEBSITE TO ALL YOUR ONLINE CIRCLE, IT WILL BE GREAT REGARD FOR ME.
Posted by at 0 comments

idea netsetter, bsnl 3g, vodafone - Unlock any USB modem –

How to unlock idea netsetter , bsnl 3g, vodafone, and all USB MODEM…?
Its simple, some free software are there to unlock the USB modem to use other Carrier SIM What you need to UNLOCK USB modem…?
1) IMEI number of USB modem – IMEI number is Printed in it, so we get it directly from modem
2) Software to unlock – Here is the download link for free software – Download and Unzip
Both are in some 300 KB, so it takes some 10 second to download(download both software)
MEGAUPLOAD – The leading online storage and file delivery service
MEGAUPLOAD – The leading online storage and file delivery service
Paste the IMEI no of USB modem in first software and click ok, with in few seconds you will get your UNLOCK code
with second software you can directly unlock USB modem – it automatically detects USB modem, when you press UNLOCK button , your USB is unlocked instantly
Both are 100% safe and secure, doesn’t corrupt anything
Unlocking Modems list
  • Huawei E156C
  • Huawei E155
  • Huawei E155X
  • Huawei E156G
  • Huawei E160
  • Huawei E160E
  • Huawei E160G
  • Huawei E161
  • Huawei E166
  • Huawei E166G
  • Huawei E169
  • Huawei E169G
  • Huawei E170
  • Huawei E170G
  • Huawei E172
  • Huawei E172G
  • Huawei E176
  • Huawei E180
  • Huawei E180S
  • Huawei E180G
  • Huawei E181
  • Huawei E182
  • Huawei E182E
  • Huawei E196
  • Huawei E216
  • Huawei E219
  • Huawei E226
  • Huawei E230
  • Huawei E270
  • Huawei E271
  • Huawei E272
  • Huawei E510
  • Huawei E612
  • Huawei E618
  • Huawei E620
  • Huawei E630
  • Huawei E660
  • Huawei E800
  • Huawei E870
  • Huawei E880
  • Huawei EG162
  • Huawei EG162G
  • Huawei EG602
  • Huawei EG602G
  • Huawei E1550
  • Huawei E1551
  • Huawei E1552
  • Huawei E1553
  • Huawei E1609
  • Huawei E1612
  • Huawei E1615
  • Huawei E1616
  • Huawei E1630
  • Huawei E1632
  • Huawei E1690
  • Huawei E1692
  • Huawei E1803
  • Huawei E1820
  • Huawei S4011
  • Huawei K3517
  • Huawei K3520
  • Huawei K3710
  • Huawei UMG181
  • Huawei EM770
  • Vodafone K2540
  • Vodafone K3250
  • Vodafone K3512
  • Vodafone K3515
  • Vodafone K3520
  • Vodafone K3565
  • Vodafone K3715
  • Vodafone E3735
Enjoy and share……
please tell this information to friends who are unaware of this, help and guide them
—————————————————————
For those use getting error in above method
(or)
After inserting other carrier sim, it doesn’t ask to enter Unlock code means use this technique
download this software
(This pack contain 3 software, total size 422 kb, will take 10 seconds to download)
Step 1: Run the first software, Enter your IMEI number and instantly you will get unlock code, copy the unlock code
Step 2 : plug your USB modem with original sim given during purchase
Step 3 : Run the third software, now one pop up display and ask for unlock code, enter it, and click ok, you will get message like this“Unlock Successfull”
Reference Site : For Complete Details
Discussion/Download: Unlock any USB modem – idea netsetter, bsnl 3g, vodafone
Posted by at 1 comments

Idea NetSetter Unlock

1. Install DC-Unlocker client
2. Run the DC-Unlocker client
SIM Lock status : ???
Wrong codes entered : ???
if SIM Lock status : Locked (Card Lock) & Wrong codes entered : 10 (unlock attempts left : 0) reset counter


SIM Lock status : Locked (customized firmware)
1. Double click the firmware update.exe
2. Enter your 8 digit flash code
You do at your own risk!

SIM Lock status : Locked (Card Lock)
1. Run the Code Writer
2. click - Check lock
3. enter your 8 digit unlock code
4. click Unlock
Posted by at 0 comments

HwkSetupV2.20.0 Main Sosftware ( SIZE: 223M )

DCTxBB5 V 2.2.0.0
------------------
1. BB5 products: RM-576,RM-577 (6700s,6700s-1c) added.
2. Local RPL Service Fixed for ASIC 2,5,6,7,11 (UEM_PASW is Correct now)
Note: Need Confirm [Readout and Use UEM IMEI] when do [Rd UEM].
3. [Check Ask/Rpl] Renamed to [Calc Ask/Rpl] as can Calculate RPL now.
4. [Calc Ask/Rpl] Function will Generate Real RPL from ASK file (ASIC 2,5,6,7,11)
Note: When Reading UEM, do not Forget Set Right [UEM Changed] Status !
5. RSA Lock/Unlock for All DCT4+ products (not need Patch)
6. Life Timer added to [PM Edit]
7. DCT4 INFINEON Based Products USB Flashing / UI support added:
RH-111,RH-125,RH-126,RM-607,RM-608,RM-643,RM-644,RM-647,RM-653,
RM-669,RM-689,RM-704,RM-732,RM-733 (1202,1616-2,1616-2b,C1-01,C1-01.1,
C1-02,C1-02.1,1280,1800,1800b,C1-00,C2-00,X1-00,X1-00.1)
8. BB5 RAP3Gv40 Based Products USB Flashing / UI support added:
RM-509,RM-510,RM-511,RM-540,RM-598,RM-604,RM-615,RM-638,RM-721,RM-722
(3710a-1,3710a-1c,3711a-1,X3-00,7230-1c,7230-1,5330-1d,6303ci,C2-01,C2-01.5)
9. BB5 RAPU Based Products USB Flashing / UI support added:
RM-582,RM-596,RM-601,RM-609,RM-610,RM-627,RM-629,RM-632,RM-634,
RM-639,RM-640,RM-645,RM-648,RM-658,RM-659,RM-662,RM-675,RM-682,
RM-688,RM-691,RM-697,RM-699,RM-707,RM-718,RM-719,RM-720,RM-749
(Vertu CQ,N8-00,C6-01,E6-00,E6-00.1,X5-01,5230-1d,E5-00,E5-00.2,X3-02,C3-01,
C5-00.X5-01.2,E73,X7-00.1,C3-01m,C7-00,6702s,C5-00.1,C7-00b,C5-03,E5-00m,
X7-00,C6-01.3,C5-03.2,C5-04.1,C7-00s)
10.BB5 RAPIDO Based Products USB Flashing / UI support added:
RM-484,RM-485,RM-486,RM-551,RM-552,RM-559,RM-588,RM-593,RM-594,
RM-612,RM-624,RM-625,RM-684
(N86-1,N86-3,N86-5,X6-00.1,X6-00m,X6-00,5230-1,5230-1c,5230-1b,C6-00,
C6-00.1,5288,5250)
11.BB5 JUNO (BCM21351) Based Products USB Flashing / UI support added:
RM-497,RM-586,RM-614,RM-618,RM-709,RM717
(7020a-2,2710c-2,C3-00,X2-00,X2-01,X2-01.1)
12.Original SX4 Card Support Added (Use Any PCSC Compatible Card Reader)


LG_GSM v 2.2.0.0
-----------------
1. Infineon:
A110,A130,A133,A133GO,A170,A180,C100,C105,C300,C300GO,C305,
C310,GB220,GB220nGO,GB230,GB280,GD350,GD510,GD510N,GM360,
GM360i,GM600,GS170,GS290,GS290GO,GS290N,GS390GO,GS500,GS500g,
GS500gx,GS500v,GT350,GT350GO,GT350i,GT360,GT365,GU220,GU230,
KC550,KC550d,KF510,KF510d,KF600,KF600d,KM380,KM380c,KM380d,
KM385d,KM386c,KP500,KP500N,KP501,KP502,KP502GO,KP505,KP550,
KP570q,KS360,KS365,T300,T310,T310i,T310N,T315,T315i,T320,
T320e,T320g,T325 added.
Notes:
1. To See Unlock Codes and Instructions, Press [BOOT]
2. To Flash Dead Phones, Tick [Emerg. Boot]
3. FLS and BIN files supported for Flashing.

2. USB Support for Infineon SGOLD3, SGOLDRADIO, XGOLD213.
Note: To use USB Select USB in [Baud] ComboBox.
3. ADI: G210,G220,G232,G233,G259,G262,G263,G610,G622,G632,G635,
G639,G660,G672,G677,C682,G688,G810,G822,G828,G912,GM200,GM205,
GM205GO,GM210,KF245,KG296,LG8930,MG235,MG295,MG296 added.
4. TI: C1300i,C2000,G850,L1400i,MG191a,MG191b,MG200c,MG200d added.
5. MTK: A120,A155,A160,A165,GB160a,GB160b,GB161,GB190a,GB270,
GS190,GS200,GS205 added.
6. BT Address Write Added for ADI, Infineon and MTK platforms.


SAMs V 2.2.0.0
---------------
TRIDENT
A127,i626,T719,X475 added (DUNL,IM,FL)
OM(SYSOL)
T209,T319 added (DUNL,IM,FL,SECT)

SWIFT
A436,A437,A516,A517,T229,T249,T339,T349-LTA-USA,T369,
T409,T619,T739 added (DUNL,IM,SECT,FL)
Added Multi Drive support for TFS Read.
Fixed SLAVE Boot Bug on some models (D980,D980F,D988)
TFS Extractor and TFS Builder added, Allows to Edit TFS files.

SWIFT-AEROFONE
Added [Patch MSL] Function to Patch without MCU Part Flashing.
C3300i,T109,T119 added (DUNL,IM,FL)
E1050,E1055G,E1055T,E1080F-IND-MEA-SEA,E1080W,
E1081T-EU-IND-MEA-SEA,E1083C,E1085F,E1085F-MEA,E1087T,E1105F,
E1150i,E1160i,E1170i,E1170T,E1172,E1175T-EU-IND,E1178,E1225F,
E1225T,E1225T-IND,E2121L added (PUNL,PIM,FL)

Notes:
1.Mixing of EU IND MEA SEA Files causes Blinking or Dead Sets.
2.E1081T EU E2P Image is not Compatible with IND, MEA or SEA.
3.For Cross Flashing Select Model Name Extension by File type.
4.Before Unlock, Info to see Codes or Rebuild IMEI use
[Patch MSL] Button or Flash with [Patch MSL] Option Enabled.
C3222,C3222W added (DUNL,CUNL)
Note: C3222 Flashing not Supported yet, use Original Flasher.
TFS Extractor and TFS Builder added, Allows to Edit TFS files.

SWIFT-3G
C5010E,E3210 added (CUNL,SECT,FL)
QUALCOMM
A597,A847,A927,B2710D,C5180,S5520,S5580,S6700T,S68 88,T359,T479,
T746,T749 added.
More Versions Support of Hidden Sysinfo models CUNL and UNFR:
A597,A706,A707,A717,A727,A847,A887,A897,A927,B2710,B2710D,S3370,
S5530,T359,T469,T479,T559,T659,T746,T749

QUALCOMM+LSI
S8500B,S8530 added (FL)

BROADCOM
S5230N added (FL,CUNL,UNFR,BRP)
S3850,S5260,S5263,S5330L,S5560i,S5750E,S5753E,S723 0B,S7230E,
S7230W,S7233E added (FL)
S5250,S5253,S5330,S5330L,S5333 Boot Repair (BRP)
[QCDI Info] Renamed to [BCMBL Info] for BroadCom Models.

INFINEON
B3310i,C3200,C3200G,C3200L,C3530,C3530L,E2230,E2230M,E2232,
E2330,E2330B,E2330C,E2530,E2652,E2652W,S3310i,S3350,S3353,
S3550,S3550C,S3550L added (CUNL,PUNL,PIM,FL,UFL)
Note: for USB Flashing select 'USB0' in [BaudRate] box.
E1151, Now Possible to Flash Read BIN Dump (Size: 007F0000)
Download>>
Posted by at 0 comments

HWK V2.20.1 upgrade package Released ( SIZE: 60.2M )

DCTxBB5 V 2.2.0.1
------------------
1. DCT4+ ASIC2 Unlock Bug Fixed
(RH-92,RH-93,RH-94,RH-95,RM-189,RM-190,RM-225)
2. Wrong Locks Status Indicator Fixed (RH-86,RH-87)
3. Detail Description Message on Bad VPL File Exception.
4. BB5 RAPU Based Products USB Flashing / UI support added:
RM-744,RM-745,RM-775 (C5-00.3,C5-00.2,X3-02.5)


LG_GSM v 2.2.0.1
-----------------
1. Infineon:
A100,A100a,A175,A175a,A175b,A180a,A180b,GB102GO,GB 105a,
GB107a,GB125a,GB126a,GS101a,GS101GO,GS107a,GS107b, GS117,
GS155,GS155a,GS155b,GS500f,GU200,GU200a,GU200b,KF5 10c,
KF600c,KF600d,KM570,KM570f,KP105a,KP106a,KP106b,KP 107a,
KP107b,T325g,TE350GO added.
2. ADI:
KP115a,KP130b,KP215a,KP260c,KP265d added.


UFS_SAMs V 2.2.0.1
--------------------
SWIFT
Some DUOS models Slave Boot bug Fixed.
SWIFT-AEROFONE
E1050,E1055T,E1080W,E1170i E2P Size Fixed.
Max Section Size Increased.
E1182 added (DUNL,PUNL,PIM,FL)
C3303i,C3322,C3500 added (CUNL,DUNL,IM,SECT,E2P)
Note:
C3322,C3500 TFS and CSC Flashing not Supported yet,
use Original Flasher.
SWIFT-3G
C5010B added (CUNL,SECT,FL)
QUALCOMM
A885,A886,F406,S3370B,S3370L added.
INFINEON
E2652,E2652W USB Flahing bug Fixed.
E2152i added (CUNL,PUNL,PIM,FL,UFL)
XGOLD213 BIF file Write bug fixed.
XGOLD213 Patch bug fixed.
BROADCOM
B5310R,C6712,S3853,S5250W added (UFL)
COMMON
Used Abbrevations List can be seen at the Bottom of this page.
   Download>>
Posted by at 0 comments

HWK V2.20.2 upgrade package Released ( SIZE: 10.9M )

DCTxBB5 v2.2.0.2
-----------------
1. BB5 RAPU Based Products USB Flashing / UI support added:
RM-776 (C3-01.5)
2. DCT4 INFINEON Based Products USB Flashing / UI support added:
RM-692,RM-693,RM-702,RM-713 (C2-02,C2-02.1,C2-03,X1-01)

LG_GSM v2.2.0.2
-----------------
1. Infineon:
A108,A190,A190a,A190b,A210,A210b,GB125R,GC900fGO,GT350f,KS360GO added.
2. EGV V3-32 and EGV V3-64 Direct Unlock and IMEI enable added.
Note: Use [Unlock] before IMEI rebuild.
3. EGV V3-64 new Flash Chips Support.

SAMs v2.2.0.2
--------------
TRIDENT VISION
[CODE CORRUPTED] for non 8 Digits PCK Fixed.
SWIFT-AEROFONE
E1050-CHN,E1050V,E1086i,E1150-CHN,E1155L,E1180,E1190,E1220i
added (PUNL,PIM,FL)
E1182L added (DUNL,PUNL,PIM,FL)
E1225T,E1182 TFS Flashing bug Fixed.
C3322 Unlock, IMEI, Sections bug Fixed.
B7722,B7732 Slave Part Flashing/Read/E2P added.
QUALCOMM
T669 Added.
INFINEON
C3011,C3560,C3750,C3752 added (CUNL,PUNL,PIM,FL,UFL)
E2232 Flashing bug Fixed.
[CODE CORRUPTED] for non 8 Digits PCK Fixed.
      Download>>
Posted by at 0 comments

HWK V2.20.3 upgrade package Released ( SIZE: 39.3M )

DCTxBB5 v2.2.0.3
-----------------
1. BB5 RAPU Based Products USB Flashing / UI support added:
RM-670,RM-679,RM-681V,RM-701,RM-730,RM-750,RM-763,RM-774,RM-779,
RM-781,RM-814,RM-815,RM-816
(700,T7-00,Vertu Con.T,600,702T,500,303,701,603,300,C5-08,C5-05,C5-06)
2. DCT4 INFINEON Based Products Flashing / UI support added:
RH-130,RH-131,RM-724,RM-725,RM-769 (100,100.1,C2-05,C2-05.1,101)
3. Vertu products names changed to RM-582V, RM-681V to keep compatibility
with DataPackageManager application.
4. New Flashloaders included.
5. Fixed BSOD bug on W7 x64 when Connect Box.

LG_GSM v2.2.0.3
-----------------
1. Infineon:
A190,A190a,A190b Read Lock Keys, Unlock, Dual IMEI Fixed.
2. Infineon EgoldVoice64_ULC2:
KG370,KG375,KG376,MG370a,MG370b added (FL,CUL,DUL,IM)
3. Infineon XMM2130: LG500G,LG800G added (FL)
4. Infineon XMM2150:
A200,A225,A230,A250,A255,A258,C330,T500,T505,T510, T515,
T530 added (FL,DUL)
S365 added (FL,CUL,DUL,IM)
Note: Use [Unlock] before IMEI rebuild.
5. Fixed BSOD bug on W7 x64 when Connect Box.

SAMs v2.2.0.3
--------------
SWIFT-AEROFONE
E1080T-SEA,E1175T-MEA,E1190-CHN,E1195,E1195-CHN,E1230
added (PUNL,PIM,FL)
E1055G info/unlock bug fixed.
xx-DX models renamed to xx-SEA (note: DD is IND not SEA)
E2222 (UNL,SECT,IM)
SWIFT-3G
(CUNL,SECT) fixed for C3630C,C3730C,S3930C
E3213K,i6320C,i6330C,S3710,S3770,S3778,S3830U,S561 0,
S5610K,S5630C added (CUNL,SECT,FL)
INFINEON
IMEI2 Rebuild added for DUOS models.
Minor bugs in AT protocol fixed:
(not read Codes and IMEI Rebuild fails on some models)
Notes:
Some S3550 units stucks on DFFS (CSC) Flashing,
Solution: Untick [Use EBL from FLS Pack] CheckBox.
COMMON
Fixed BSOD bug on W7 x64 when Connect Box.
              Download>>
Posted by at 0 comments

HwkSetupV2.20.3 Main Sosftware ( SIZE: 330M )

HwkSetupV2.20.3 Main Sosftware    ( SIZE: 330M )
1. HWK2.20.3 Released, Added more lastest models;
2. Main software added DataPackageManager flashfiles downloader platforms;
3. Supported Hwk local upgrade ways;

DCTxBB5 v2.2.0.3
-----------------
1. BB5 RAPU Based Products USB Flashing / UI support added:
RM-670,RM-679,RM-681V,RM-701,RM-730,RM-750,RM-763,RM-774,RM-779,
RM-781,RM-814,RM-815,RM-816
(700,T7-00,Vertu Con.T,600,702T,500,303,701,603,300,C5-08,C5-05,C5-06)
2. DCT4 INFINEON Based Products Flashing / UI support added:
RH-130,RH-131,RM-724,RM-725,RM-769 (100,100.1,C2-05,C2-05.1,101)
3. Vertu products names changed to RM-582V, RM-681V to keep compatibility
with DataPackageManager application.
4. New Flashloaders included.
5. Fixed BSOD bug on W7 x64 when Connect Box.

LG_GSM v2.2.0.3
-----------------
1. Infineon:
A190,A190a,A190b Read Lock Keys, Unlock, Dual IMEI Fixed.
2. Infineon EgoldVoice64_ULC2:
KG370,KG375,KG376,MG370a,MG370b added (FL,CUL,DUL,IM)
3. Infineon XMM2130: LG500G,LG800G added (FL)
4. Infineon XMM2150:
A200,A225,A230,A250,A255,A258,C330,T500,T505,T510, T515,
T530 added (FL,DUL)
S365 added (FL,CUL,DUL,IM)
Note: Use [Unlock] before IMEI rebuild.
5. Fixed BSOD bug on W7 x64 when Connect Box.

SAMs v2.2.0.3
--------------
SWIFT-AEROFONE
E1080T-SEA,E1175T-MEA,E1190-CHN,E1195,E1195-CHN,E1230
added (PUNL,PIM,FL)
E1055G info/unlock bug fixed.
xx-DX models renamed to xx-SEA (note: DD is IND not SEA)
E2222 (UNL,SECT,IM)
SWIFT-3G
(CUNL,SECT) fixed for C3630C,C3730C,S3930C
E3213K,i6320C,i6330C,S3710,S3770,S3778,S3830U,S561 0,
S5610K,S5630C added (CUNL,SECT,FL)
INFINEON
IMEI2 Rebuild added for DUOS models.
Minor bugs in AT protocol fixed:
(not read Codes and IMEI Rebuild fails on some models)
Notes:
Some S3550 units stucks on DFFS (CSC) Flashing,
Solution: Untick [Use EBL from FLS Pack] CheckBox.
COMMON
Fixed BSOD bug on W7 x64 when Connect Box.
Download>>
Posted by at 0 comments

Saturday, August 11, 2012

avira_antivir_personal


Posted by at 0 comments
Subscribe to: Posts (Atom)